User

Hi,

wiring and programming went smooth. Working on a 2015 Honday Odyssey with Evo one and THAR-ONE-HON4. After programing when I hit the buttons for remote start the van will not remote start. The blue led flashes and that is it. Any help would be appreciated.

2012 Kia Soul standard key no immobilizer. Using thar-one-khy1. I am using the tachless mode. I have programmed 2 rf641w keys successfully, however they do not unlock and lock the vehicle properly. I even tested the wires to ground to verify ground control and that was better than the module was doing. So here's the behavior:

Lock: will not work unless I lock the car with the oem remote period. making me think the evo module is storing status incorrectly or is unaware. Unlock. Works if I press the unlock button 3 times
I have also tried adjusting option 8 for this with no luck. (unlock pulse adjustment)
Kill start - I am unaware, but is there no feature to kill the remote start and turn the vehicle off via the remotes?

Thanks in advance.

Having an issue with 2010 kia soul with normal key, wired up correctly but has no immoblizer wire, do i need to connect red connector to white connector wires still. Instructions aren't very good on this point. It says "US models: if the (~) Data wire is not present the vehicle is not equipped with an immoblizer. For CAN functions use programming #2.  I have tired programming to #2 and blue light is on then wihen I turn the key on blue light goes out and doesn't flash at all but when I turn the key off blue light comes back on.  It does not flash at all.  Please Help. No remote start installed. Using as standalone.  CAN Bus wires good 2.5v on each at all times.